Conditions for Clearing the DTC

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The condition for setting the DTC is no longer present.
The EBCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles.
An ECE 13 response may be required, after repairs are made, and DTCs are cleared, operate the vehicle at speeds greater than 13 km/h (8 mph) to complete the self test, and the EBCM will turn off the ABS indicator. Refer to ABS Description and Operation (Under 8600 GVW) or ABS Description and Operation (Equal to or Over 8600 GVW) for a complete description of ECE 13.