Front Seat Heater Control Module Replacement
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Front Seat Heater Control Module Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front driver seat. Refer to Front Seat Replacement - Bucket . |
|
| 1 | Driver Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Power) or Front Seat Cushion Outer Trim Panel Replacement (Manual) . |
| 2 | Driver Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement . |
| 3 | Driver Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement . |
| 5 | Front Seat Heater Control Module Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 6 | Front Seat Heater Control Module Tip: Disconnect the electrical connector. |