LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 891 (Seat Heating System & Seat Cooling System) >> Diagnostic Information and Procedures >> DTC B2508 or B2509 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the MSM connectors C1 and C4.
  2. Test for infinite resistance between the left seat heating element supply voltage circuit terminal 14 and ground.
    • If less than infinite, test the supply voltage circuit and the seat cushion and seat back heating element control circuits for a short to ground.
  3. Ignition ON, verify that a test lamp does not illuminate between the supply voltage circuit terminal 14 and ground.
    • If the test lamp illuminates, test the supply voltage circuit and the seat cushion and seat back heating element control circuits for a short to voltage.
  4. Test for infinite resistance between the right seat heating element supply voltage circuit terminal 6 and ground.
    • If less than infinite, test the supply voltage circuit and the seat cushion and seat back heating element control circuits for a short to ground.
  5. Ignition ON, verify that a test lamp does not illuminate between the supply voltage circuit terminal 6 and ground.
    • If the test lamp illuminates, test the supply voltage circuit and the seat cushion and seat back heating element control circuits for a short to voltage.
  6. If all circuits test normal, replace the MSM.