Front Bumper Fascia Outer Support Replacement (GMC)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Fascia Outer Support Replacement (GMC)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia trim cap. Refer to Front Bumper Fascia Trim Cap Replacement (GMC) . |
|
| 1 | Front Bumper Fascia Outer Support Plastic Retainers (Qty: 2) |
| 2 | Front Bumper Fascia Outer Support Screws (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 3 N.m (27 lb in) |
| 3 | Front Bumper Fascia Outer Support |