LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 877 (Frame And Underbody) >> Repair Instructions >> Oil Pan Skid Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The following service procedure is for 1500 series vehicles with RPO Code NZZ.
    Fig 1: View Of Oil Pan Skid Plate & Bolts
    GM1698082Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the mounting bolts for the oil pan skid plate.
  3. Remove the oil pan skid plate.
    4. IMPORTANT: The following service procedure is for 2500/3500 series vehicles with RPO Code NZZ.
    Fig 2: View Of Oil Pan Skid Plate & Bolts
    GM1698083Courtesy of GENERAL MOTORS CORP.
  4. Remove the mounting bolts for the oil pan skid plate.
  5. Remove the oil pan skid plate.
scientia non olet · About LEMON Manuals