LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 877 (Frame And Underbody) >> Repair Instructions >> Oil Pan Skid Plate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The following service procedure is for 1500 series vehicles with RPO Code NZZ.
    Fig 1: View Of Oil Pan Skid Plate & Bolts
    GM1698082Courtesy of GENERAL MOTORS CORP.
  1. Position the oil skid plate on the frame.
  2. Install the oil skid plate mounting bolts.
    NOTE: Refer to Fastener Notice .

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

    3. IMPORTANT: The following service procedure is for 2500/3500 series vehicles with RPO Code NZZ.
    Fig 2: View Of Oil Pan Skid Plate & Bolts
    GM1698083Courtesy of GENERAL MOTORS CORP.
  3. Position the oil pan skid plate on the frame.
  4. Install the oil skid plate mounting bolts.
    NOTE: Refer to Fastener Notice .

    Tighten:  Tighten the bolts to 28 N.m (21 lb ft).

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals