Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Mega Fuse Cover

Courtesy of GENERAL MOTORS CORP.

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single Battery) or Battery Negative Cable Disconnection and Connection (w/Auxiliary Battery) or Battery Negative Cable Disconnection and Connection (w/Dual Batteries) .
Remove the fuse cover.

Fig 2: View Of Battery Cable Components

Courtesy of GENERAL MOTORS CORP.

Remove the starter solenoid cable nut (1) from the fuse stud.
Remove the starter solenoid cable terminal (2) from the fuse stud.

Fig 3: View Of Generator Battery Jumper Cable & Components

Courtesy of GENERAL MOTORS CORP.

Remove the generator battery jumper cable to fuse nut (3).
Remove the generator battery jumper cable terminal (4) from the fuse stud.
Remove the positive battery cable terminal from the fuse stud.

Fig 4: View Of Fuse & Holder

Courtesy of GENERAL MOTORS CORP.

Remove the fuse from the holder.