LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement (4.3L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Generator, Bracket & Bolts
    GM1877553Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement (4.3L)  or Generator Replacement (4.8L, 5.3L, 6.0L, and 6.2L)  or Generator Replacement (6.6L) .
  2. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  3. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement - Right Side .
  4. Remove the generator bracket bolts and nut.
  5. Remove the generator bracket.
scientia non olet · About LEMON Manuals