LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Battery, Charging System And Starting System) >> Repair Instructions >> Auxiliary Battery Relay Replacement (6.2L) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Auxiliary Battery Relay & Nuts
    GM1857383Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the auxiliary battery relay and nuts.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

    2. Fig 2: View Of Battery Cable Nuts, Retainers & Bolts
    GM1857177Courtesy of GENERAL MOTORS CORP.
  2. Install the auxiliary battery positive cable to the auxiliary battery relay.
  3. Install the auxiliary battery positive cable nut (4) to the battery relay stud.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  4. Position the auxiliary battery positive cable boot (5) to the auxiliary battery relay stud.
  5. Connect the auxiliary battery positive cable electrical connector (1) to the battery relay.
    6. Fig 3: View Of Battery & Battery Cable Fasteners
    GM1857067Courtesy of GENERAL MOTORS CORP.
  6. Install the auxiliary battery positive cable to the auxiliary battery relay.
  7. Install the auxiliary battery positive cable nut (6) to the battery relay stud.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  8. Position the auxiliary battery positive cable boot (5) to the auxiliary battery relay stud.
  9. Connect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single Battery)  or Battery Negative Cable Disconnection and Connection (w/Auxiliary Battery)  or Battery Negative Cable Disconnection and Connection (w/Dual Batteries) .
scientia non olet · About LEMON Manuals