LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Latch Release Handle Replacement

Hood Latch Release Handle Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Hood Latch Release Cable & Nut
GM1674991Courtesy of GENERAL MOTORS CORP.
Hood Latch Release Handle Replacement

Callout Component Name
Preliminary Procedure: 
Remove the body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .
1 Hood Latch Release Handle Nut
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)
2 Hood Latch Release Handle
scientia non olet · About LEMON Manuals