Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pinch-Weld Flange Weatherstrip (Front Door Opening)

Courtesy of GENERAL MOTORS CORP.

Align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side.
Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.
Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
Install the front door sill plate. Refer to Front Side Door Sill Plate Replacement (Regular Cab/Crew Cab) or Front Side Door Sill Plate Replacement (Extended Cab) .