Endgate Torque Rod Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Torque Rod Assembly & Retainer Bolt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the endgate. Refer to Endgate Replacement (Pickup Box) .
1	Torque Rod Retainer Bolt NOTE: Refer to Fastener Notice . Tip: Loosen bolt only, DO NOT remove. Tighten: 12 N.m (106 lb in)
2	Torque Rod Assembly