Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Upper Reveal Molding from Windshield

Courtesy of GENERAL MOTORS CORP.

Install the upper reveal molding (1) to the windshield (2).
Align the notch in the molding to the center mark on the upper paint band on the windshield.
Press the upper reveal molding on to the windshield starting at the center and working outboard to both sides.
Install the windshield. Refer to Windshield Replacement .