Component Testing
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install a 25-amp fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The appropriate window motor should perform the UP or DOWN function.
- If the function does not perform as specified, replace the appropriate window motor.
- Reverse the jumper wires; the appropriate window motor should perform the DOWN or UP function.
- If the function does not perform as specified, replace the appropriate window motor