Rear Side Door Inside Handle Replacement (With (YE9))

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Side Door Inside Handle & Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Side Door Inside Handle Seal Procedure Rotate front side door Inside release handle to full open position. Use a small pair of 45 degree needle nose pliers to remove foam seal at handle to expose retaining clip. Use small pair of 45 degree needle nose pliers to release clip inside handle.
2	Rear Side Door Inside Handle

Callout

Component Name

Rear Side Door Inside Handle Seal

Procedure

Rotate front side door Inside release handle to full open position.
Use a small pair of 45 degree needle nose pliers to remove foam seal at handle to expose retaining clip.
Use small pair of 45 degree needle nose pliers to release clip inside handle.

Rear Side Door Inside Handle