Brake Pedal Assembly Replacement
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Brake Pedal Assembly Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Apply the park brake. |
|
| 1 | Brake Booster Pushrod Retainer Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Brake Booster Pushrod Retainer |
| 3 | Stoplamp Switch |
| 4 | Brake Booster Pushrod |
| 5 | Brake Pedal Nut |
| 6 | Brake Pedal Pivot Bolt Procedure: Hold the brake pedal nut stationary and tighten the brake pedal pivot bolt. Tighten: 47 N.m (35 lb ft) |
| 7 | Brake Pedal |