Brake Warning Indicator
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The instrument panel cluster (IPC) illuminates the Red Brake Warning indicator when one or more of the following occurs.
- The body control module (BCM) detects that the park brake is engaged.
- The IPC detects a low brake fluid condition. The IPC receives a low brake fluid signal from the low brake fluid switch in the master cylinder reservoir requesting illumination.
- The electronic brake control module (EBCM) detects an ABS malfunction which disables dynamic rear proportioning (DRP). The IPC receives a GMLAN message from the EBCM requesting illumination.
- The IPC performs the bulb check at the start of each ignition cycle. The Red Brake Warning indicator illuminates for approximately 3 seconds before turning OFF.
- The IPC detects a loss of GMLAN communications with the EBCM.