Turn Signal Multifunction Switch Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Multifunction Turn Signal Switch & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedure Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the steering column shroud. Refer to Steering Column Shroud Replacement .
1	Turn Signal Multifunction Switch Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 3 N.m (27 lb in)
2	Turn Signal Multifunction Switch Procedure: Disconnect any electrical connectors as needed.

Callout

Component Name

CAUTION: Refer to SIR Caution .

Preliminary Procedure

Remove the steering wheel. Refer to Steering Wheel Replacement .
Remove the steering column shroud. Refer to Steering Column Shroud Replacement .

Turn Signal Multifunction Switch Bolt (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 3 N.m (27 lb in)

Turn Signal Multifunction Switch
Procedure:
Disconnect any electrical connectors as needed.