Removal Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.
- Remove the air distribution duct. Refer to Air Distributor Duct Replacement .
- Disconnect the electrical connection from the recirculation actuator (1).
- Remove the recirculation actuator retaining screws.
- Remove the recirculation actuator.