Circuit/System Testing
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, perform the speedometer gauge sweep test with the scan tool.
- If the speedometer gauge does not sweep from its low to high position, replace the IPC.
- Ignition OFF, raise the vehicles drive wheels.
- Engine ON, transmission in drive, verify the scan tool Vehicle Speed Sensor parameter matches the speedometer display.
- If the Vehicle Speed Sensor parameter does not match the speedometer display, replace the IPC.
- Verify that the odometer is operating properly.
- If the odometer is not operating properly, replace the IPC.