Circuit/System Testing
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, headlamp switch OFF, verify the scan tool Headlamp Switch parameter is Inactive.
- If not Inactive, test the headlamps signal circuit for an open or short to voltage. If the circuit tests normal, replace the headlamp switch.
- Ignition ON, park lamp switch OFF, verify the scan tool Park Lamp Switch parameter is Inactive.
- If not Inactive, test the park lamp switch signal circuit for an open or short to voltage. If the circuit tests normal, replace the headlamp switch.
- Ignition OFF, key out of the ignition, verify the scan tool Key In Ignition Status parameter is Key Out.
- If not Key Out, test the key in ignition switch signal circuit for an open or short to voltage. If the circuit tests normal, replace the ignition switch.
- Ignition ON, doors closed, verify the scan tool Door Ajar Switch parameters are Inactive/Door Closed.
- If not Inactive/Door Closed, go to Courtesy Lamps Always On .
- If all circuits test normal, replace the BCM.