Installation Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the A/C compressor bracket.
- Install the A/C compressor bracket mounting bolts.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
- Install the A/C belt tensioner.
- Install the A/C belt tensioner bolts.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
- Install the A/C compressor. Refer to Compressor Replacement (LLY/LMM) or Compressor Replacement (LU3) or Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG) .
NOTE:
Refer to Fastener Notice
.