Removal Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screwdriver and a hammer.
- If equipped remove the HVAC module assembly screws.
- Remove the upper HVAC module case (1) from the lower HVAC module case (2).
- Remove the right temperature door (4) from the upper HVAC module case (3).