LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 862 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement (4.3, 4.8, 5.3, and 6.0L) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator & Bolts
    GM660895Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator.
    2. NOTE: Refer to Fastener Notice .
  2. Install the radiator bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  3. Connect the transmission oil cooler lines to the radiator, if necessary. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  4. Connect the engine oil cooler lines to the radiator, if necessary. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting .
  5. Install the radiator outlet hose for the 4.3L engine, or the 4.8L, 5.3L and 6.0L engines. Refer to Radiator Outlet Hose Replacement .
  6. Install the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement .
scientia non olet · About LEMON Manuals