LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 862 (Engine Cooling System) >> Repair Instructions >> Fan Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Camshaft Position Sensor Electrical Connector
GM1334862Courtesy of GENERAL MOTORS COMPANY
  1. Remove the drive belt. Refer to DRIVE BELT REPLACEMENT
  2. Remove the fan clutch. Refer to Fan Clutch Replacement (Diesel) 
  3. Disconnect the camshaft position (CMP) sensor electrical connector.
    4. Fig 2: View Of Cooling Fan Pulley
    GM1334864Courtesy of GENERAL MOTORS COMPANY
  4. Remove the fan pulley bolts/nuts.
  5. Remove the fan pulley.
scientia non olet · About LEMON Manuals