Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fan Shroud Retainers

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the upper fan shroud.
Install the fan shroud retainers (1).
Install the fan shroud bolts (2).
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 2: View Of TCM Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the TCM electrical connectors (1).
Install the TCM and cover.
Tighten the TCM electrical connector bolts.
Tighten: Tighten the bolts to 8 N.m (71 lb in).

Fig 3: View Of TCM Cover & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the TCM cover to the fan shroud.
Install the TCM cover bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 4: View Of PCM Engine Harness Clip

Courtesy of GENERAL MOTORS CORP.

Install the engine harness clip to the PCM cover.
Install the A/C line retainer to the fan shroud.

Fig 5: View Of Air Cleaner Outlet Duct

Courtesy of GENERAL MOTORS CORP.

Install the air cleaner outlet duct.
Tighten the air cleaner outlet duct clamp at the throttle body.
Tighten: Tighten the clamp to 4 N.m (35 lb in).
Tighten the air cleaner outlet duct clamp at the mass airflow sensor.
Tighten: Tighten the clamp to 4 N.m (35 lb in).