Hood Front Molding Replacement (GMC HD)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP. Hood Front Molding Replacement (GMC HD)
| Callout |
Component Name |
Preliminary Procedure:
Release the hood in order to access the front hood molding. |
| 1 |
Hood Front Molding Locator Tab
Tip:
Position the locator tab first into the hood panel center hole followed by the remaining retainers. |