Hood Front Molding Replacement (Chevrolet V22)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hood Front Molding (Chevrolet V22)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Release the hood in order to access the front hood molding.
1	Hood Front Molding Locator Tab Tip: Position the locator tab first into the hood panel center hole followed by the remaining retainers.
2	Hood Front Molding Retainer Clips Tip: Secure the retainer clips working from the center of the molding, outward until all the clips are secure to the hood.
3	Hood Front Molding