Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the sunshade to the vehicle from the passengers side.

Fig 1: View Of Sunshade End & Bracket Notch

Courtesy of GENERAL MOTORS CORP.

Insert the end of the sunshade (1) to the driver side bracket (2) notch.

Fig 2: Identifying Sunshade Bracket Notch

Courtesy of GENERAL MOTORS CORP.

Insert the sunshade (1) to the passengers side bracket (2) notch.

Fig 3: Turning The Sunshade Cam Counterclockwise

Courtesy of GENERAL MOTORS CORP.

Turn the sunshade cam (2) until it is aligned with the bracket (3) notch.
Install the sunshade.

Fig 4: Identifying Suitable Tool For Procedure

Courtesy of GENERAL MOTORS CORP.

Remove the suitable tool (1) from the sunshade cam locking hole (2).
Ensure that the sunshade cam (2) is fully seated in the bracket (3) and the sunshade slides smoothly.
Install the sunroof window. Refer to Sunroof Window Replacement (Crew Cab) or Sunroof Window Replacement (Extended Cab) .
Verify the operation of the sunshade.