Conditions for Setting the DTC
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
B1019 00
- The SDM was programmed with the wrong options for the vehicle.
- The wrong components were installed for the content of the vehicle.
- SDM Connector may have bent pins or shorting bars causing the SDM to learn deployment loops that are not actually present.
B1019 3A
- The vehicle was configured for PPS but the SDM does not detect that the PPS indicator is present due to loss of power at indicator.
- The vehicle is not configured for PPS and the SDM detects that the PPS indicator is present.