Rear Seat Head Restraint Guide Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Head Restraint & Guides

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear seat. Refer to Rear Seat Replacement (Extended Cab with RPO AM7) or Rear Seat Replacement (Extended Cab with RPO A68) or Rear Seat Replacement (Crew Cab with RPO A68) .
1	Rear Seat Head Restraint Tip: Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
2	Rear Seat Head Restraint Guides Tip: Release the j-channel at the bottom of the seat back and pull the seat back cover up enough to gain access to the head restraint guides. Squeeze the bottom of the head restraint guide together and push up to remove.