Front Seat Cushion Center Cover Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front center seat. Refer to Center Seat Replacement .
1	Front Seat Armrest Hinge Finish Cover Screw (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Seat Armrest Hinge Finish Cover (Qty: 2)
3	Front Seat Center Cushion Bolt (Qty: 2) Tighten: 9 N.m (80 lb in)
4	Front Seat Center Cushion
5	Front Seat Cushion Center Cover Tip: Pull outward on the cushion center cover sides to disengage from the center seat assembly. Pull forward to disengage the remaining retainers.
6	Front Seat Cushion Center Cover Retainer Clip (Qty: 6)