LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Body Side Rear Upper >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the upper pillar garnish molding retainers to the body.
  2. Push the upper pillar garnish molding towards the body to engage the clips.
  3. Install the upper pillar garnish molding. Refer to Garnish Molding Replacement - Upper Pillar .
    Fig 1: Installing Body Side Rear Upper Garnish Molding
    G02423370Courtesy of GENERAL MOTORS CORP.