LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Rear Wheel Opening >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push pin retainers (2) that secure the wheel opening molding (1) to the fender extension.
  2. Remove the wheel opening molding (1) from the vehicle.
    Fig 1: Removing Rear Wheel Opening Molding
    G02422785Courtesy of GENERAL MOTORS CORP.