LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Frame And Underbody) >> Repair Instructions >> Underbody Inspection

Underbody Inspection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Check for obvious deterioration on the floor pan.
  3. Check for loose dirt and corrosion around the inside of the floor pan reinforcement member access holes. This is the first indication that corrosion may exist in hidden areas.

    Perform all repairs before the final cleaning and protective treatment is performed.

  4. Using a chisel, ensure that the drain provisions in the floor pan reinforcement members are open.

    Open the drain holes in the body side panels using a punch and a drift.