LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Frame And Underbody) >> Repair Instructions >> Front Engine Crossmember Replacement (RWD) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine crossmember.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the engine crossmember mounting bolts.

    Tighten 

    Tighten the bolts to 120 N.m (89 lb ft).

  3. Connect the electrical wiring harness connectors to the engine crossmember.
  4. Lower the vehicle.
    Fig 1: Installing Front Engine Crossmember (RWD)
    G02423585Courtesy of GENERAL MOTORS CORP.