Service Programming System (SPS) Notice
WARNING: This page does not describe the selected car, but rather 249 other vehicles, including the 2004 Saturn Vue, 2004 Saturn L300, 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, and 2004 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before programming a control module, the following must be observed, or control module damage may occur:
- The Tech 2 & the terminal must have the latest software.
- The vehicle battery must be fully charged. The battery voltage should be between 12-14 volts.
- The Tech 2 & the terminal cable connections must be secure.
- A battery charger must NOT be connected to the battery when programming a control module.