LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Automatic Transmission - 4L80-E/4L85-E (Service & Replacement)) >> Repair Instructions >> Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission heat shield to the cross member.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the two bolts securing the transmission heat shield to the cross member.

    Tighten 

    Tighten the bolts to 17 N.m (13 lb ft).

  3. Lower the vehicle.
    Fig 1: Installing Heat Shield
    G02424563Courtesy of GENERAL MOTORS CORP.