LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Tires & Wheels) >> Repair Instructions >> Aluminum Wheel Refinishing

Aluminum Wheel Refinishing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

A protective clear coating covers the surface of original equipment cast aluminum wheels. A surface degradation may develop if frequent automatic car wash cleaning wears off the factory applied protective clear coating. This can happen at some automatic car wash facilities that use aggressive brushes to clean whitewalls and tires. Once you damage the protective clear coating, exposure to caustic cleaners and road salt can cause further surface deterioration. Damage to the protective clear coating is corrected by replacing the damaged wheel. Refinishing is no longer recommended.