Park Brake Release Handle: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the release cable from the brake lever. Disconnect the cable from the retainer on the brake lever. Remove the park brake release lever handle mounting bolt.
- Remove the release handle from the instrument panel retainer. Remove the release handle and cable from the vehicle. Note the routing of the cable as you remove the park release handle assembly from the vehicle.