Park Brake Release Handle: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install the release handle and the cable to the vehicle. Install the cable using the same routing as the original cable. Install the release handle to the instrument panel retainer.
- Install the park brake release lever handle mounting bolt. Tighten to specifications. See TORQUE SPECIFICATIONS . Connect the cable to the retainer on the brake lever. Connect the release cable to the lever.