Master Cylinder Reservoir: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the park brake and block the wheels. Remove the brake master cylinder assembly. See MASTER CYLINDER .
- Drain the brake fluid from the reservoir.
- Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only at the flange.
- Remove the brake fluid level sensor by carefully depressing the retaining tabs and pushing the sensor through the reservoir, if applicable. Carefully remove the reservoir retaining pins.
- Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder. Remove the seals from the master cylinder.