Hydraulic Brake Booster: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the park brake and block the wheels. Remove the master cylinder from the booster. See MASTER CYLINDER . Do not remove the pipes from the master cylinder. Set the master cylinder aside in the engine compartment.
- Disconnect the power brake booster inlet hose, the steering gear inlet hose, and the power brake booster outlet hose from the booster assembly. Remove the stoplight switch. See STOPLIGHT SWITCH .
- Remove the 4 booster to bulkhead nuts. Remove the booster assembly. Remove the gasket.