LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Disc Brakes) >> Removal & Installation >> Brake Caliper Brackets >> Removal (Rear - 1500 & 2500 Series)

Removal (Rear - 1500 & 2500 Series)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Remove the tire and wheel assembly.
  2. Remove the brake caliper from the brake caliper mounting bracket and support the brake caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the hydraulic brake hose from the brake caliper. See BRAKE CALIPERS  .
  3. Remove the brake pads from the brake caliper mounting bracket. Remove the anti-rattle clips from the brake caliper bracket.
  4. Remove the brake caliper bracket mounting bolts. Remove the brake caliper bracket. Remove any contaminants or foreign material from the inside ends of the brake caliper bracket. Clean the mounting surface and threads of the brake caliper bracket.
scientia non olet · About LEMON Manuals