LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Disc Brakes) >> Adjustments & Inspections >> Park Brake Cable Automatic Adjuster >> Enabling

Park Brake Cable Automatic Adjuster: Enabling

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the park brake pedal in the FULL upward position.
  2. Pull rearward on the front park brake cable until the tension is released from the scribe or nail installed through the holes in the pedal assembly.
  3. Remove the scribe or screwdriver.
  4. Slowly release the park brake cable until it returns to its original position.
  5. Release the park brake pedal.
  6. Lower the vehicle.
  7. Apply and release the park brake pedal to ensure that there is no binding or sticking.