4-5-6 Clutch Dampener Overhaul (6L50/80/90)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 4-5-6 Clutch Dampener

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	4-5-6 Clutch Dampener Retaining Ring CAUTION: Ensure the retaining ring is fully seated when installed. Using a screwdriver, fully seat the retaining ring into the groove by pushing on the inside diameter around the whole circumference. If the retaining ring is not fully seated, transmission damage will result.
2	4-5-6 Clutch Dampener Apply Plate
3	4-5-6 Clutch Dampener TIP: Dry and inspect the clutch dampener for the following conditions: Pitting Flaking Delamination Wear Glazing Cracking TIP: If any of these conditions are found, replace the dampener.