LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1740 (Automatic Transmission - ALLISON - DTC P0880 To DTC P2771) >> DTC P2723 or P2724 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the Transmission Fluid Level and Condition Check to verify correct fluid level and condition.
  2. Perform a Road Test while observing the Turbine Speed and Transmission OSS parameters with a scan tool. The Turbine Speed and Transmission OSS parameters should increase and decrease steadily as the speed of the vehicle changes in each gear. The Turbine Speed will make a large change while the transmission is changing gears.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.