Circuit/System Testing
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the TCM.
- Ignition ACCESSORY, test for greater than 5 V on the signal circuit between the TCM harness connector terminal 43 and ground.
- If less than the specified value, test the signal circuit for a short to ground, or an open/high resistance. If the circuit tests normal, replace the BCM.
- If the signal circuit tests normal, replace the TCM.