Conditions for Running the DTC
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
P0716 Condition 1
- DTC P0716, P0717, P0721, or P0722 is not set.
- A shift is not in progress.
- The engine speed is 200 RPM or greater.
P0716 Condition 2
- DTC P0716, P0717, P0721, or P0722 is not set.
- A shift is not in progress.
P0716 Condition 3
- DTC P0716, P0717, P0721, or P0722 is not set.
- A shift is not in progress.
- The turbine speed is greater than 100 RPM.
- The engine speed is greater than 100 RPM.
P0717 Condition 1
- DTC P0721, P0722, P0729, P0731, P0732, P0733, P0734, P0735, and P0736 is not set.
- A shift is not in progress.
- The engine speed is 200 RPM or greater.
- The range attained is not neutral.
- The transmission fluid temperature is greater than -25°C (-13°F).
P0717 Condition 2
- DTC P0721, P0722, P0729, P0731, P0732, P0733, P0734, P0735, and P0736 is not set.
- A shift is not in progress.
- The range attained is not neutral.
- The transmission fluid temperature is greater than -25°C (-13°F).
- The engine speed is 400 RPM or greater.
- The transmission output speed is greater than 150 RPM.