Conditions for Running the DTC
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
P2762
- DTC P2762 has not set this ignition cycle.
- The engine speed is 500 RPM or greater for 5 seconds.
- The ignition voltage is 8.6 volts or greater.
- Transmission fluid temperature is 140°C (284°F) or greater.
P2763
- DTCs P2763, P2764, P0658, or P0659 have not set this ignition cycle.
- The engine speed is 500 RPM or greater for 5 seconds.
- The ignition voltage is 8.6 volts or greater.
- The high side driver is enabled.
P2764
- DTC P2764 has not set this ignition cycle.
- The engine speed is 500 RPM or greater for 5 seconds.
- The ignition voltage is 8.6 volts or greater.
- The high side driver is enabled.
- Transmission fluid temperature is 140°C (284°F) or greater.